WOODS:
from REHABILITATION to SIZING

Module 1: March 7-9 (after work)  |  Module 2: March 14-16 (after work)  |  Module 3: March 25, 26 and April 01, 2

This course is a partnership between IASA and CEEC / ISEL

 

IASA and CEEC / ISEL develop joint theoretical and practical training in order to provide engineering and architecture professionals with the skills necessary to perform their duties, regardless of their previous academic background and which is usually very varied.

ceec04.png
Logo IASA Blue3A ColorIASA.png

FRAMEWORK 

 

The Circular Economy is today underlying most construction projects. More sustainable products that have a long life cycle are increasingly an option. Wood as a construction material is versatile, as it has the ability to be reborn, reproduce, reuse, recover, recycle and reuse, presenting itself as a circular and sustainable economic model. However, there are gaps in their knowledge of wooden structures, whether in the act of designing wooden structures, or in construction work in their application and still serious failures in rehabilitation. ​

 

The Wood course: from Dimensioning to Rehabilitation is divided into 3 modules: ​

Module 1 - Rehabilitation of Wood Structures

Knowing the behavior of the “wood” material, the types of degradation and the means of diagnosis is essential to correctly intervene in rehabilitation projects. ​

 

Module 2 - Calculation of Timber Structures according to Eurocode 5 (EN 1995-1:2014)

The Eurocodes, in this module, will support the structural calculation, as well as a set of European regulations. These regulations present a vast domain of complex and demanding matters, which must be adopted for the design of structures. ​

 

Module 3 - Automatic Calculation of ROBOT

Wood Structures Training action on Automatic Calculation of Wood Structures using the Autodesk RobotÒ calculation software.

GOALS 

 

This course has the following general objectives:

Promote knowledge of the material “wood” and its main characteristics as a construction material;

To make known examples for the correct use of wood and its rehabilitation;

Provide designers with a set of rules and design methods that fit and facilitate the design of this type of structures, according to Eurocode 5 (EC5). ​

 

Module 1 - Rehabilitation of Wooden Structures

Understand the importance and usefulness of the rehabilitation of wooden structures in old buildings, in the context of the conservation and restoration of the built heritage.

Knowing the behavior of the “wood” material, the types of degradation and the means of diagnosis, with the aim of evaluating the need for treatment or reinforcement and what intervention techniques are, as well as the care of wood application on site. ​

 

Module 2 - Calculation of Wood Structures according to Eurocode 5 (EN 1995-1:2014)

Provide trainees with contact with practical cases of design of wooden structures and derivatives in the design of these structures, whether in the rehabilitation phase or in new constructions.

Carry out the design of practical cases and apply practical rules to assess the bearing capacity of existing structural elements in the context of rehabilitation. ​

 

Module 3 - Automatic Calculation of ROBOT® Wood Structures

Acquire skills in the automatic calculation of wooden structures using the commercial software Autodesk Robot Structural Analysis (version 2022).

Develop numerical finite element models (2D and/or 3D) of wooden structures in the context of new construction and rehabilitation.

Analyze results from the point of view of decision support and feasibility of structural solutions.

Use the specific module for dimensioning wooden structures according to Eurocode 5.

 

Prerequisite: the trainee must have the Autodesk software program installed on his computer - Robot Structural Analysis (student or trial version - see www.autodesk.com, after registration he can access the student or trial version).

 

RECIPIENTS

Module 1 - Rehabilitation of Wooden Structures

Aimed at all those interested in the area, from carpenters and builders to designers, construction directors, licensing entities, among others.

Module 2 - Calculation of Wood Structures according to Eurocode 5 (EN 1995-1:2014)

Preferably aimed at civil engineers, designers, construction directors, among others.

Module 3 - Automatic Calculation of ROBOT® Wood Structures

Preferably intended for civil engineers, designers and other technicians involved in the design of structures.

 

COURSE PROGRAM

Module 1 - Rehabilitation of Wooden Structures (9 hours)

Researcher Doctor Helena Cruz

Module 2 - Calculation of Wooden Structures according to Eurocode 5 (EN 1995-1:2014) (9 hours)

Prof. Doctor Duarte Barroso Lopes

Module 3 - Automatic Calculation of ROBOT® Wood Structures (30 hours)

 

Prof. Doctor Duarte Barroso Lopes

Prof. Doctor Diogo Ribeiro

SKILLS ACQUIRED 

 

Module 1 - Rehabilitation of Wooden Structures (9 hours)

Module 2 - Calculation of Wooden Structures according to Eurocode 5 (EN 1995-1:2014) (9 hours)

Module 3 - Automatic Calculation of ROBOT® Wood Structures (30 hours)

LOCATION, DATES AND TIME 

 

The entire course will be taught online.

 

Module 1 - Rehabilitation of Wooden Structures (9 hours)

Dates:

March 7, 8 and 9, 2022 

Time: 

19:00 to 22:00

Module 2 - Calculation of Wooden Structures according to Eurocode 5 (EN 1995-1:2014) (9 hours)

Dates:

March 14, 15 and 16, 2022 

Time: 

19:00 to 22:00

Module 3 - Automatic Calculation of ROBOT® Wood Structures (30 hours)

Dates:

March 25, 26 and April 1, 2, 2022

Time: 

Fridays from 9 am to 1 pm and from 2 pm to 6 pm

Saturdays from 9 am to 1 pm and from 2 pm to 5 pm

TRAINERS 

Helena Cruz.png

Researcher Doctor Helena Cruz

Duarte Barroso Lopes.png

Prof. Doctor Duarte Barroso Lopes

Diogo Ribeiro.png

Prof. Doctor Diogo Ribeiro

 

REGISTRATIONS

Module 1 - Rehabilitation of Wooden Structures 

200 € + VAT

Module 2 - Calculation of Wooden Structures according to Eurocode 5 (EN 1995-1:2014)

200 € + VAT

 

Module 3 - Automatic Calculation of ROBOT® Wood Structures

600 € + VAT

 

Associate trainees of Partner Entities:

- 10% discount on any registration;

- Additional 5% discount for enrollment in the full course.

 

Trainees in general:

- 10% discount on the full course.

Register here.

[Download the registration form to your computer, open it in Excel, fill in the fields and follow the instructions indicated to make the payment by bank transfer. Then send the registration form and proof of payment to the email address  idalia.gomes@isel.pt . You will then receive confirmation of registration.]

 

Grades:

  • Cancellation of registration can be done up to 14 days before the start of the training and the student will be refunded the full amount. After this period, 50% of the registration fee will be retained;

  • Registration is complete only after payment has been made.

For more information or clarification of doubts, please contact the course coordinator:

Prof. Dr Maria Idália Gomes ( idalia.gomes@isel.pt,  965 084 587).

 

COMMENTS

 

Registrations can be made by module, the value of which is as follows:

Module 1 - Construction inspection and testing. Diagnostic methodologies:

Without experimental class, 4h: 80 € + VAT
With experimental class, 6h: 130 € + VAT

 

Module 2 - Masonry: Performance and compatibility requirements:

Without technical visit, 10h: 200 € + VAT
With technical visit, 14h: 300 € + VAT

Module 3 - Reinforced Concrete: Performance and compatibility requirements

Lessons, 12h: 240 € + VAT

 

Trainees who enroll in the 3 modules benefit from a 10% discount (regardless of whether they enroll in class

experimental and / or technical visit). Additional discount for members of partner organizations and students.

Theoretical classes will be online.

Make your registration here.

[Download the registration form to your computer, open it in Excel and follow the instructions indicated therein]

For more information or to clarify doubts, please contact the course coordinator:

Prof. Doctor Maria Idália Gomes ( idalia.gomes@isel.pt, 965 084 587).

Partners:

Logo OE.png
 
Logo OET.png
imagem para cabeçalhoWEB.jpg
aimmp.png
LOOGO 1 E 2.jpg

Trainers from:

LNEC_logo_2linhas.png
ISEP_marca_v2_cor_peq.png